Descargar Imprimir esta página

Bosch SHI Instrucciones De Instalación página 3

Ocultar thumbs Ver también para SHI:

Publicidad

Idiomas disponibles

Idiomas disponibles

]rooms and Mater}a(s
Needed
TOOLS
NEEDED
Hammer
Tape Measure
Wire Cutter
SUotScrewdriver
PhHHpsScrewdriver
Torx Screwdriver
LeveU
Wire Stripper
DrHU
MATERIALS
NEEDED
(AdditionaU materiaUs may be required to compUy with bcaU codes,)
EUectricaU SuppUy CaNe - Minimum #14 AWG, 2 conductor, 1 ground, insuUatedcopper
conductors,
!::_,_-_, Hot Water SuppUy Line - Minimum 3/8" O.D. copper tubing or metal braided dish-
washer supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/compres-
_,,
sion fitting, or braided hose).
90 ° elbow with 3/8" N.P.T. male threads on one leg, and sized to fit your water supply
.... _
line (copper tubing/compression
fitting, or braided hose) on the other leg.
Teflon tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief.
2

Publicidad

loading

Este manual también es adecuado para:

Shv