Publicidad
Idiomas disponibles
Idiomas disponibles
EC DECLARATION OF CONFORMITY
The manufacturer of the product covered by this Declaration is:
UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the relevant
provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where applicable,
fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC.
Machinery Directive.
2014/30/EU.
Electromagnetic Compatibility Directive
2011/65/EU. &
The Restriction of the Use of certain Hazardous
2015/863/EU.
Substances in Electrical Equipment (RoHS) Directive
2012/19/EU.
The Waste Electrical and Electronic Equipment (WEEE) Directive.
And is in conformity with the applicable requirements of the following documents:
EN 61029-1:2009+A11• EN 61029-2-11:2012+A11• EN 55014-1:2017+A11:2020 •
EN IEC 55014-1:2021 • EN IEC 55014-2:2021 • EN IEC 61000-3-2:2019+A1 •
EN IEC 61000-3-11:2019
EC type approval to 2006/42/EC Article 12 Section 3b Machinery
Notified Body: TÜV Rheinland LGA Products GmbH - Tillystraße 2 - 90431 Nürnberg
Notified Body No.: 0197 Reg. No.:
Product Details
Description:
R210MTS G2 210mm MULTI-MATERIAL TABLE/MITRE SAW
Evolution Model No: 116-0001, 116-0002, 116-0003, 116-0004
Brand Name:
EVOLUTION
Voltage:
220-240V~ 50Hz
Input:
1500W
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and verifies that our technical file contains the documents listed above and that they
are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
BM 50592380 0001
Print: Barry Bloomer
Supply Chain & Procurement Director
08/02/22
20
www.evolutionpowertools.com
Publicidad
