Publicidad
Idiomas disponibles
Idiomas disponibles
www.evolutionpowertools.com
INTENDED USE OF THIS POWER TOOL
WARNING: This product is a Hand Operated
Compound Mitre Saw and has been designed
to be used with special Evolution blades.
Only use accessories designed for use in
this machine and/or those recommended
specifically by Evolution Power Tools Ltd.
When fitted with an appropriate blade this
machine can be used to cut:
Mild Steel
Aluminium
Wood
Plastics
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a Hand Operated
Compound Mitre Saw and must only be used
as such. It must not be modified in any way,
or used to power any other equipment or
drive any other accessories other than those
mentioned in this Instruction Manual.
WARNING: This machine is not intended
for use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning the safe
use of the machine by a person responsible
for their safety and who is competent in its
safe use.
Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with, this machine.
ELECTRICAL SAFETY
This machine is fitted with the correct
moulded plug and mains lead for the
designated market. If the supply cord is
damaged, it must be replaced by a special
cord or assembly available from the
manufacturers or its service agent.
OUTDOOR USE
WARNING: For your protection if this tool is to
be used outdoors it should not be exposed to
rain, or used in damp locations.
Do not place the tool on damp surfaces.
Use a clean, dry workbench if available.
For added protection use a residual current
device (R.C.D.) that will interrupt the supply
if the leakage current to earth exceeds 30mA
for 30ms. Always check the operation of the
residual current device (R.C.D.) before using
the machine.
If an extension cable is required it must be a
suitable type for use outdoors and so labelled.
The manufacturers instructions should be
followed when using an extension cable.
POWER TOOL GENERAL SAFETY
INSTRUCTIONS
•
Follow all these instructions before and
while you are working with the saw.
•
Keep these instructions in a safe place.
•
Avoid body contact with earthed
components.
•
When equipment is not being used it
should be kept in a dry, closed place out of
children's reach.
•
You will work better and more safely if you
keep your tools sharp and clean. Check the
power cable regularly and have it replaced
by an authorized specialist at the first sign
of any damage.
•
Check your extension cables regularly and
replace them if damaged.
•
When working outdoors, use only extension
cables that are approved for outdoor use
and which are marked accordingly.
•
Concentrate on what you are doing. Take
a sensible attitude to your work. Never use
the tool when you are tired.
•
Never use a tool with a switch that cannot
be turned on and off.
•
Caution! The use of plug-in tools and
accessories other than those intended may
put you at risk of injury.
•
The machine is equipped with a safety
switch to prevent it being switched on
again accidentally after a power failure (in
table saw mode).
•
Never use the saw to cut round timber.
•
Check the power cable. Never use a faulty
or damaged power cable.
•
Do not use the cable to pull the plug out
of the socket-outlet. Protect the cable from
heat, oil and sharp edges.
•
We recommend that you wear non-slip
shoes when working outdoors.
•
Keep long hair in a hair net.
•
Avoid abnormal working postures.
•
An untidy work area may result in accidents.
•
Do not allow other persons, particularly
children, To touch the tool or the power
cable. Keep them away from your
workplace.
•
The splitter is an important safety device.
Not only does it guide the workpiece, it
also prevents the kerf closing behind the
blade so that there is no kickback from
the workpiece. Note the thickness of the
splitter, the splitter should never be thinner
than the saw blade body or thicker than the
width of its kerf.
5
EN
Publicidad
