J.P. Bowlin Sartorius Cubis II Manual página 759

Level 1 Level 2
Sound (loudspeaker)
Device Update firmware
Maintenance
Install QAPP Center
Install customized
QAPP
Device data backup
Restore device data
Export settings
Import settings
Reset to factory
settings
Create diagnostic
file
* If a related QAPP is activated: The menu is shown.
Level 3
Touch sounds
Message sounds
Sound for end-of-action
List of connectors and
then list of firmware
List of connectors and
then list of QAPP Centers
List of connectors and
then list of customized
QAPPs
List of connectors
List of connectors
Role management
User management
Export overview
List of connectors for
import
Restore factory settings
Operating Instructions Cubis
Operating Design
Description
Activate or deactivate the acoustic signal
when operating a button.
Activate or deactivate the acoustic signal
for messages.
Activate or deactivate the acoustic signal
for the end of an action.
— Starts a firmware update.
— Not for conformity-assessed devices.
Updates the QAPP Center using the
selected connector.
Updates a customized QAPP using the
selected connector.
Saves the device data on the selected
connector.
Loads saved device data from the selected
connector.
Save settings from role management or user
management to a selected connector.
Displays the list of connectors, e.g., a server
or connected USB stick.
Load selected settings, e.g. from a server or
connected USB stick.
— Resets the device to factory settings and
deletes all configurations.
— The audit trail and data memory will be
retained.
Creates a report containing information on the
device status and error logs to a connector.
| MCA Models
®
41