Descargar Imprimir esta página

VM Motori R754EU6C Manual De Instrucciones página 83

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Type of injection
GB
Type of fuel
Total capacity of engine internal
cooling circuit
Total capacity of engine cooling
circuit installed on the vehicle
Coolant
DEF fluid
DEF fluid tank capacity
DEF fluid tank capacity supplied
by the manufacturer of the vehicle
in wich the engine is installed
English
Fuel supply circuit
Common Rail direct injection with high pressure injection pump
The diesel fuel to be used must comply to the UNI EN590 standard.
(maximum bio-diesel content 7%).
HVO fuels complying with EN15940* standard are compatible with
the engines R754EU6C without any special maintenance (standard
maintenance to be applied).
(*) EN15940 : Paraffinic diesel fuel from synthesis or
The use of fuels with specifications other than those
indicated is forbidden.
Cooling circuit
litres
Respect the instructions of the manufacturer of the vehicle
-
in which the engine is installed
Consisting of 50% fluid according to standars ASTM D
3306 type 1 (PARAFLU UP is recommended) and 50%
-
demineralised or distilled water
Exhaust circuit
Solution of 32,5% urea + 67,5% demineralised water
IMPORTANT: it is forbidden the use of solutions with
-
Fluid handling in accordance with specifications
litres
Follow the instructions of the manufacturer of the vehicle in
litres
14
hydrotreatment.
IMPORTANT:
5
different specifications .
ISO 22241 - 1 - 2 - 3 - 4
14 (including reserve)
wich the engine is installed
R754EU6C
42432104F

Publicidad

loading

Este manual también es adecuado para:

R75eu6d