Publicidad
Idiomas disponibles
Idiomas disponibles
HANDLING AND LIFTING
Secure the engine with a lifting device
(lifting beam) of appropriate capacity.
GB
IMPORTANT
The angle formed by the lifting device
chains must not exceed 5°, as shown in
the figure A.
Hook the lifting device to the fixing points
as shown in the figure A.
Before carrying out the lifting, identify the
centre of gravity of the load.
IMPORTANT
The brackets of the fixing points have
been dimensioned to lift the engine
only and are not type-approved to lift
any additional weight. Do not lift the
engine using a different procedure
from the prescribed one; otherwise, the
warranty for damages will be voided.
English
22
R754EU6C
MAX 5°
42432104F
Publicidad
