Publicidad
Idiomas disponibles
Idiomas disponibles
E. Turn the installation bolt clockwise with the included 3mm Allen wrench
while holding the hex spacer from turning until the rivet nut is fully seated.
2. Turn
installation
bolt
clockwise
F. Once rivet is fully seated, remove the installation tool by loosening the
installation bolt. The installation bolt will be re-used for each rivet install.
Repeat steps C - F for all 6 mounting holes.
•
G. Mount bracket using included hardware in the rivet nut.
Wireless Camera System
1. Hold hex spacer
Bracket Holding Screws (6)
(M4x0.7x20mm)
Rivet Nut fully seated
Vehicle
panel
Owner's Manual | 28
Publicidad
