Publicidad
Idiomas disponibles
Idiomas disponibles
4.6 Direct Power Connection Guide
The camera operates on an internal battery but can be connected to the trailer's 12-volt
battery supply. This connection requires a 2.5mm jack and the +12-volt Power and GND
(ground) pin out is shown below. The camera consumes up to 1.5A (max) at 12-volt.
2.5mm Adaptor
If needed, install 12-volt adaptor harness. Example of harness routing is shown
•
below (highlighted in red).
12-volt
Power
Harness
Wireless Camera System
2-wire Adaptor
2.5mm Adaptor
Grommet
Ferrite Core
2-wire Adaptor
12-volt
Power
Harness
Grommet
Ferrite Core
Owner's Manual | 34
Publicidad
