Publicidad
Idiomas disponibles
Idiomas disponibles
8 Software update procedure for WCS Camera
NOTICE: If software update is available, it will be offered at a Toyota dealership.
USB Cover Removal and Installation USB
Removal
1. Remove the (2) USB Cover retaining screws using a 3mm Allen wrench (included).
2. Remove the USB Cover and Seal for access to the USB connector.
The firmware update is allowed only in Park mode with engine on.
1) Veillez à ce que la caméra à mettre à jour soit allumée, appariée au véhicule et
chargée au moins à 75 %.
2) With USB cover removed, insert the update device (USB thumb drive with adaptor)
into the camera's USB port.
3) Navigate to the Update Software setting in your vehicle multimedia display by
selecting:
Wireless Camera System
USB Cover Seal
USB Cover
USB Cover Retaining Screws
Owner's Manual | 53
Publicidad
