Toyota Yokowo VZ-003900 Manual De Instrucciones página 41

3. Position the Wireless Camera using the following sequence below to put the
camera in pairing mode.
1) Start with camera in the [UP] position for 2-5 seconds
2) Rotate the camera in the [DOWN] position for 2- 5 seconds
3) Rotate the camera in the [UP] position for 2- 5 seconds
4) If correctly done, the LED Status light will blink orange once every second
(see Wireless Camera Status Indicator
[UP] Position
4. Select the "OK" button and a QR code will be shown on the head unit display.
5. From about 3-4 inches from the multimedia display, aim the Wireless Camera lens
at the radio display to scan the QR code.
6. Once QR code scan and pairing is completed, "WCS Camera was added
successfully" will be displayed.
Wireless Camera System
[DOWN] Position
for details).
[UP] Position
In Pairing Mode
Owner's Manual | 41