EXFO FTB-1v2 Guia Del Usuario página 410

IEEE 488.2 and Specific Command Reference
IEEE 488.2 Required Commands
Example(s)
See Also
398
The table below shows the contents of this
register.
Bit Weight
PON 128 Power ON Enable
URQ 64 User ReQuest Enable
CMD 32 CoMmanD Error Enable
EXE 16 Execution Error Enable
DDE 8 Device Dependent Error Enable
QRY 4 QueRry Error Enable
N.U. 2 Not used
OPC 1 Operation Complete Enable
A value of 1 in the Enable Register enables the
corresponding bit in the Status Register, a value
of 0 disables the bit. The value of the
<RegisterValue> shall be in the range of 0
through 255.
*ESE 25
where 25 = (bit EXE, bit DDE and bit OPC)
*ESE 0
clears the content of the Standard Event Status
Enable register
*ESE?
*ESR?
*ESE
Meaning
FTB-1v2 and FTB-1v2 Pro