Publicidad
Idiomas disponibles
Idiomas disponibles
2. Replacing the hook and tightening the screws.
Install securely the hook in the groove of power tool
and tighten the screws to fix the hook firmly.
Groove
NOTE
Hook can be used as a hanger.
USING THE NOSE CAP
WARNING
When attaching or detaching the nose cap, be
sure to remove your finger from the trigger and
remove all remaining fasteners and the battery
from the nailer.
If you like to protect the surface of workpiece against
scratches or markings made by the push lever, attach the
accessory nose cap to the push lever.
(1) Remove all remaining fasteners and battery from
nailer.
(2) Put the nose cap to the toe of the push lever.
(3) When not using the nose cap, secure in the storage
compartment located on the reverse side of the
magazine.
Hook
Screw
Push Lever
Nose Cap
Magazine
NOTE
The nose cap may reduce nailing depth due to its
thickness. Re-adjustment of nailing depth is required.
CLEARING A JAM
If nails are jammed in firing head, remove it, and adjust the
nailing in the following order.
CAUTION
Remove the battery from the Nailer.
(1) Remove the battery from the Nailer.
(2) Remove all nails.
(3) Release the Lock lever and open guide plate.
Lock lever
Guide Plate
(4) Remove the jammed nail with a slotted-head
screwdriver.
CAUTION
● NEVER hit the driver blade.
● NEVER point the tool at yourself or another
person, to avoid risk of injury by mis-firing.
Even if the battery is removed from the nailer,
there is still energy of compressed remaining
inside.
English
Nose Cap
(3)
21
Publicidad
