Publicidad
Idiomas disponibles
Idiomas disponibles
6.2
Starting the measurement procedure
Activating the multifunctional display (stand-alone operation)
144 • seca 655/654; seca 455; seca 257/256/254; seca 453
3. To switch off the device, press and hold the
ð The multifunctional display goes out.
ð The device is switched off.
NOTE
After 30 seconds' inactivity, the display goes dark to save energy.
After 5 minutes' inactivity, the device switches off automatically. You
can modify this time period
switching-off (Auto off), rechargeable battery operation
4. Restore the power supply using the power supply unit after each mobile use
è Establishing power
ð The device is ready for use on a stationary basis.
ð The battery pack charges automatically.
ð Network functions are active.
Device mode
Basic
Advanced
Expert
Service
The multifunctional display will switch to standby mode
time, page 170) after a set time period. The following screensaver is displayed in
stand-alone operation:
1. Press the multifunctional display to activate it.
ð The main screen is displayed.
2. Ask the patient to step onto the weighing platform.
3. Complete the measurement as described in the relevant sections of these
instructions for use.
è Setting the time period for automatic
supply, page 139.
Function available
Screensaver for
stand-alone operation
key on the battery pack.
only, page 163.
•
•
•
•
(è Setting standby
Publicidad
