Publicidad
Idiomas disponibles
Idiomas disponibles
Interrupting and restoring the power supply (power supply operation)
Interrupting and restoring the power supply (rechargeable battery operation)
If restarting using the display is unsuccessful, you can briefly interrupt the power
supply to the device:
1. Make sure that there is no load on the weighing platform.
2. Disconnect the power supply unit from the power supply socket.
3. Wait about a minute.
ca. 60 sec.
4. Plug the power supply unit back into the socket.
ð The device and the multifunctional display switch on automatically.
ð The device is ready for operation.
If restarting using the corresponding menu function is unsuccessful, you can
briefly interrupt the power supply to the device:
1. Make sure that there is no load on the weighing platform.
2. Press and hold the
ð The multifunctional display goes out.
ð The device is switched off.
3. Release the
key and wait about a minute.
4. Press the
key on the battery pack again.
ð The device and the multifunctional display switch on automatically.
ð The device is ready for operation.
key on the battery pack.
English
Troubleshooting • 197
Publicidad
