Publicidad
Idiomas disponibles
Idiomas disponibles
Activating the multifunctional display (network connection)
Using a reserved device (network connection)
The multifunctional display will switch to standby mode
time, page 170) after a set time period. The following screensaver is displayed
with a network connection:
1. Press the multifunctional display to activate it.
ð The main screen is displayed.
2. Scan your ID and the ID of the patient.
NOTE
If you press the
Continue as guest
ment immediately and scan the IDs later.
3. Ask the patient to step onto the weighing platform.
4. Complete the measurement as described in the relevant sections of these
instructions for use.
You can reserve the device (from firmware version 1.3) for your patient in the
software (depending on version). The name of the patient is
seca analytics 125
displayed on the reserved device:
1. Ask the patient to step onto the weighing platform.
ð The main screen is displayed.
2. Complete the measurement as described in the relevant sections of these
instructions for use.
(è Setting standby
Screensaver for
network connection
key, you can start the measure-
English
Operation • 145
Publicidad
