Walter SURFOX MAX Serie Manual Del Usuario página 18

Mounting DW brush
4.3.
When installing the brushes, the DW wand must not be connected to the device.
B
C
A
Included
10 mm wrench
D
max
5/8"
brush adaptor (A) on the DW wand (see chapter 4.2).
54-B 149
• Install the
DW brush (A) into the
54-B 604 54-B 605
• Insert the sleeve (B).
54-B 618
• Screw the threaded coupling of the extraction tool (C) onto the brush.
• Pull the brush out of the sleeve.
• Remove the extraction tool
• Use the 10 mm wrench (included) to tighten the brush firmly onto the adaptor thread. The brush coupling segment is shaped
(D) for easy grip with the wrench.
• Ensure that no more than 5/8" (15 mm) of carbon fiber is exposed.
18