Publicidad
Idiomas disponibles
Idiomas disponibles
B
URN PREVENTION
During the cleaning process, the wand tip and work piece
can reach very high temperatures:
• Very hot parts can cause skin burns upon contact.
• Do not touch the wand tip or work piece while working
or immediately after use, they may be extremely hot and
could cause serious burns.
• Allow to cool before coming in contact with exposed skin.
Be very careful when handling a newly processed piece
and when removing the pads and inserts.
E
LECTRIC SHOCKS
All electric shocks are potentially fatal, so it is necessary
to take appropriate safety measures to minimize the risk of
electric shock:
• Before connecting this unit, check that the voltage
and amperage shown on its rating plate match the
power supply. Operating this unit other than specified
on the rating plate may result in personal injury to the
user and damage the unit.
• The device must be connected to a mains power
supply fitted with an efficient, functioning and
periodically tested earthing system. Otherwise, the
manufacturer is relieved of any liability for any loss
or damage caused by this serious act of negligence.
• This unit is equipped with a 3-conductor power cord and
a 3-prong electrical plug that must be connected to an
appropriately grounded electrical outlet.
• Do not use the device in damp rooms.
• Never touch live parts.
• Never operate the unit with its protective cover removed.
• Always switch off the device if the workstation remains
unattended (during breaks and at the end of shifts).
• Frequently inspect the power supply cable and if there is
any damage or abrasion to the protective coating, replace
it immediately.
• When not in use, turn OFF the unit, unplug the power
cord and the air hose (if any).
• Carry out maintenance only after disconnecting the
device from the mains.
• Maintenance of electrical parts must only be performed
by experienced and authorized personnel.
• Always use original spare parts.
If while using the device you experience even the slightest
sensation of electric shock, switch off the unit immediately
and do not use it until the problem has been identified and
resolved by qualified personnel.
All users of the device must wear suitable protective gloves
for the handling of the parts and for the use of the wand.
All users and maintainers of the device must wear insulating
gloves to protect themselves from accidental contact with
live parts.
To maximize safety, it is preferable to always use insulating
tools when performing maintenance operations.
7
Publicidad
