Publicidad
Idiomas disponibles
Idiomas disponibles
Personal protective equipment (PPE)
1.1.
The use of this device entails several risks, therefore the use of appropriate personal protective equipment (PPE) is necessary.
ELECTROLYTE SOLUTIONS
For its normal operation, the device requires the use of
special electrolyte solutions that contain phosphoric acid.
These products are dangerous because:
• They are corrosive.
• They may cause irritation and burns if they come into
contact with the skin or mucous membranes.
• If they come into contact with the eyes, they can cause
serious eye damage.
• Using them exposes the operator to the risks typically
associated with the use of chemical substances.
In addition, during processing, these substances:
• Conduct potentially dangerous high electrical current
flows if you touch them.
• Release harmful fumes when they evaporate.
Do not use products other than those indicated in this
manual (otherwise any form of warranty will be voided) and
do not mix these products with others.
Always store these substances in a safe place in their
original containers, out of the reach of children and other
unqualified persons. Keep container contents clean. Do not
reuse electrolyte cleaning solutions.
In case of accidental contact with the eyes or skin,
or if swallowed, follow the instructions shown on the
product safety data sheets (MSDS).
See also chapter 1.4, where some first aid measures are
illustrated.
You can request a copy of the safety data sheets for
electrolytic solutions at:
WALTER
Phone (US): +1 866 592-5837
Phone (CA): +1 888 592-5837
Website: walter.com
6
All users of the device must wear appropriate work
clothing in order to mitigate the risks related to the use of
electrolyte solutions. The clothing must meet the following
requirements:
• Gloves must be made of materials that are resistant to
acids and chemicals.
• All garments must be waterproof to ensure better
protection for the user.
• Clothes and protective devices must always be intact and
kept in good condition.
It's important to keep the device as clean as possible to
reduce the risk of accidental contact with electrolyte
solutions.
The operations performed with this device must be carried
out in well ventilated places.
If this is not possible, as for example in the case of use in
confined spaces (silos, sewers, tanks, furnace combustion
chambers, pipes, etc.), an adequate extraction system
must be implemented.
The SURFOX MAX is not equipped with a built-in fume
extraction device, so it is recommended that an
appropriate external system be used for this purpose.
Publicidad
