CST/BERGER F034063800 Manual Original página 13

Safety Notes
Working safely with the measuring
tool is possible only when the
operating and safety information
are read completely and the instruc-
tions contained therein are strictly
followed.
labels on the measuring tool unrec-
ognisable. SAVE THESE INSTRUC-
TIONS.
Caution – The use of other operating or
adjusting equipment or the application of
other processing
those mentioned here, can lead to danger-
ous radiation exposure.
The measuring tool is provided with a warn-
ing label in English (marked with number 7
in the representation of the measuring tool
on the graphics pages).
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam yourself.
This measuring tool produces laser
class 2M laser radiation according to
IEC 60825-1. Looking or viewing directly into the
laser beam – especially with optical instruments such
as binoculars etc. – can damage the eye.
Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses are
used for improved visualisation of the laser beam,
but they do not protect against laser radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses
do not afford complete UV protection and reduce
colour perception.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of the
measuring tool is maintained.
Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or themselves.
Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which may
ignite the dust or fumes.
12 | English
Cross-line Laser
Never make warning
methods
Functional Description
Intended Use
The measuring tool is intended for determining and
checking horizontal and vertical lines as well as plumb
points.
Product Features
The numbering of the product features shown refers
to the illustration of the measuring tool on the graphic
than
page.
1 Button for hand-receiver mode
2 On/Off button for laser beam
3 Operating mode button
4 Laser beam outlet opening
5 Battery compartment
6 Plumb point, downward
7 Laser warning label
8 LED for charge condition of the battery
9 LED for hand-receiver mode
10 Batter-board holder*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Noise Information
The A-weighted sound pressure level of the audio sig-
nal can exceed 80 dB(A).
Do not hold the measuring tool close to your
ear!
2 610 A15 120 • 25.11.09