cecotec DRUMFIT ROWER 5500 REGATTA Manual De Instrucciones página 40

ENGLISH
SPM Mode
- It displays the rowing speed or cadence (60SPM≈15KM/H).
- The RESET and SET functions will not be available.
DST Mode
- It displays the rowing distance travelled in km (1 back and forth≈0.0015KM).
- Press the SET key to set the distance values, ranging from 0:00 to 99:00. Each time you
press the key, the distance increases by 0.1 km. Once you have finished setting the target
distance, press the MODE key to confirm and exit the setting mode.
- If you do not perform any operation within 30 seconds, the display will exit the setting
mode and the current setting value will be maintained.
- Press and hold the SET key for 3 seconds to continuously increase the numerical values.
Release the SET key and the numerical value will immediately stop increasing.
- Press the RESET key to reset the DST values to zero. Press and hold the RESET key to reset
and reset the DST values.
CAL Mode
- It displays the calories burned (40calories≈1KM).
- Press the SET key to set the calorie values, ranging from 0 to 9900. Each time you press the
key, the value increases by 5 calories. Once you have finished setting the target calories
burned, press the MODE key to confirm and exit the setting mode.
- If you do not perform any operation within 30 seconds, the display will exit the setting
mode and the current setting value will be maintained.
- Press and hold the SET key for 3 seconds to continuously increase the numerical values.
Release the SET key and the numerical value will immediately stop increasing.
- Press the RESET key to reset the CAL values to zero. Press and hold the RESET key to reset
and reset the CAL values.
STROKES Mode
- It displays the number of rowing strokes.
- Press the SET key to set the calorie values, ranging from 0 to 9900. Each time you press the
key, the value increases by 100. Once you have finished setting the target time, press the
MODE key to confirm and exit the setting mode.
- If you do not perform any operation within 30 seconds, the display will exit the setting
mode and the current setting value will be maintained.
- Press and hold the SET key for 3 seconds to continuously increase the numerical values.
Release the SET key and the numerical value will immediately stop increasing.
- Press the RESET key to reset the STROKES values to zero. Press and hold the RESET key to
reset and reset the STROKES values.
TOTAL STROKES Mode
40 DRUMFIT ROWER 5500 REGATTA