Bilanciai PMA Instrucciones De Uso Y Advertencias página 21

3. SAFETY DEVICES
3.1 NOISE
The noise exposure level of personnel is less than 80 dB, during the instrument's operating cycles.
The actual noise level of the instrument during operation at the site of use is different from the measured
value.
The noise level is influenced by:
Type and characteristics of the site of use.
•
Other adjacent running machines.
•
INFORMATION
The User must apply preventive and protective measures in relation to noise, in
accordance with the legislation of the country where the instrument is installed and
used.
3.2 VIBRATIONS
The vibrations produced by the instrument are not hazardous to the health of the operators.
Excessive vibration can only be caused by a mechanical fault, which must be reported
and rectified immediately, so as not to jeopardise the safety of the instrument and
the operators.
3.3 ELECTROMAGNETIC COMPATIBILITY
The supplied instrument contains electronic components that are affected by conducted and radiated
emissions and subject to Electromagnetic Compatibility regulations.
Emission values are within regulatory requirements through the use of:
Components complying with the Electromagnetic Compatibility Directive.
•
Suitable connections.
•
Filters where needed.
•
Therefore, the machine complies with the Electromagnetic Compatibility Directive (EMC).
INFORMATION
CAUTION