Bilanciai PMA Instrucciones De Uso Y Advertencias página 56

7.1 PLACING THE INSTRUMENT IN MAINTENANCE MODE
Risk of serious damage to the health of personnel.
Follow the procedure described in this section before performing any maintenance
work.
INFORMATION
Refer to the 'Controls' paragraph of this manual for the location of the instrument
controls.
To place the instrument in maintenance mode, proceed as described below:
STEP ACTION
1 Wait for any weighing cycle in progress to finish.
2 Turn the master switch to 0-OFF.
Remove any product that may be on the platform
3
Unplug the power plug from the socket it is connected to.
4
NOTE: Refer to the Connections paragraph.
Put up a sign saying 'MACHINE UNDER MAINTENANCE: FORBIDDEN TO ACCESS AND
4
SWITCH ON THE POWER" on the main switch.
DANGER