Bilanciai PMA Instrucciones De Uso Y Advertencias página 35

4.7 WORK PROCESS DESCRIPTION
The following table describes the work process of the instrument:
STEP DESCRIPTION
1 Place the load to be weighed on the instrument platform.
2 Display the weight on the terminal (in 'single scale' or 'multi division' version).
3 Remove the load from the platform.
INFORMATION
The instrument is equipped with safety limiters against overloads.
4.8 OPTIONAL ACCESSORIES
The instrument can be equipped with the following optional parts:
Multi-division version.
•
Version with anti-corrosion AISI 304 stainless steel weighing surface.
•
High-resolution version with up to 10,000 divisions.
•
Support frame (1) of the instrument with a work surface at a height of 700 mm (except for the
•
300x250 mm version).