Publicidad
EN
Perform the installation work properly according to this Installation instruction so that the product can function well.
After installation, fully explain how to use it to your customer.
Cautions and warnings
Before installation, read these "Cautions and warnings" carefully and attach the equipment correctly. This manual uses various
indications to guide safe installation of the product and to prevent injury to customers or other people and damage to property.
This product should be installed by a professional.
The indications and their meanings are as follows.
Symbol example
WARNING
This indicates that misoperation could result in injury or physical damage
CAUTION
This symbol indicates misuse may result in injury or physical damage.
The following symbols are used to classify and explain instructions that must be followed.
The
symbol indicates something that
is prohibited.
●Do not use any power supply other than the one specified
●Do not use damaged power cords, electric wiring, or connections
●Do not use power cords or electric wiring with loose connections
(Failure to do so may cause fire or electrical shock.)
●Do not install the power supply connection directly beneath the water supply position,
or allow the water supply hose to touch the power supply connection
(Condensation or the like could cause the power supply connection to become wet, causing fire or
electrical shock.)
●Do not strike, yank, twist, excessively bend, damage, alter, or heat the power cord,
electric wiring, and connections. Also, do not place anything heavy on, bind, or pinch
the power cord, electric wiring, and connections
Prohibited
(Using a damaged part may result in fire, electrical shock, heat, or a short circuit.)
●Do not remove or install while the power is on or while water is supplied to the main unit
(Doing so may cause electrical shock or malfunction.)
●Do not install the product in open air, on slanted wall or in a place exposed to thumping
vibration
(The installation may become unstable and the product may fall and cause injury.)
●In accordance with the laws and standards of the area where you use it, do not use
anything other than tap water or well water
(Doing so may cause irritation to the skin and malfunction.)
●The installation has to be in accordance with the local standard
●Always connect the product to the cold water supply
(Failure to do so may result in burns and equipment malfunction.)
Be sure
●Be sure to hold the frame when carrying the product body
to follow
(If you hold other part, the product may be broken, resulting in injury, physical damage or water
leak.)
2
(Always observe these warnings. )
Meaning of symbol
The
symbol indicates something that must be
done.
WARNING
●Check that an appropriate ground is installed
●For the ground, use copper wire with a ground resistance of no more than 100 and a
diameter of at least 1/16" (1.6 mm)
●If there is no ground installed, ask the contractor who did the installation to install the
ground
(Failure to install a ground may result in electrical shock if there is a malfunction or current leak.)
●Check that the connections of the power supply and electric wiring are connected
properly
●Be sure to connect to an earth leakage circuit breaker using power supply equipment
equipped with a ground
●Install this product in accordance with installation and electrical work restrictions for
the corresponding country
●If the wiring has not been completed, ask the contractor who did the installation to do it
(Otherwise, failure to do so may cause fire or electrical shock.)
Be sure
to follow
●Install the power supply equipment (device) and
its connections at least 23-5/8" (0.6 m) away from the edge
of the shower tub or bathtub
(Otherwise, failure to do so may cause fire or electrical shock.)
●If the power cord is damaged, avoid danger by having the manufacturer's repair
department or equivalent specialist replace it
(Otherwise, failure to do so may cause electrical shock.)
●Check that the wires are connected properly
(Otherwise, the device may malfunction.)
●People other than technicians should never disassemble, repair, or alter the product
(Doing so may cause a malfunction, electrical shock, or injury.)
Do not
disassemble
●Do not fold or crush the water supply hose; do not damage by cutting with a sharp
object
(Doing so may cause water leaks.)
●Do not remove the drain valve or fill valve while the shutoff valve is open
Prohibited
(Doing so will cause water to spurt out.)
●Do not give direct to the product
(Otherwise, the product may be broken,resulting in injury,physical damage or water leak.)
●Carry out the installation according to the Installation Guide
(Otherwise, failure to install properly it may cause water leaks, electrical shock, or fire.)
Be sure
●Be sure to use the included or specified parts for installation work
to follow
(Otherwise, the product may not be installed properly.)
WARNING
More than 23-5/8"
(More than 0.6 m)
CAUTION
3
Publicidad
