Recording Mode Setting; Tape Length Setting - JVC GR-AXM77UM Manual De Instrucciones

12
EN
SP/EP Recording Mode Button
Select Dial
MENU Jog Dial
Viewfinder
SP
Recording mode
indicator
LCD monitor or viewfinder
4
MENU END
FOCUS
EXPOSURE
DATE TIME
TELE MACRO
TAPE LENGTH
M. W. B.
ZOOM SPEED
4
NEXT
Menu Screen
TAPE LENGTH
T20
T30
T40
EXIT
TAPE LENGTH Setting Menu
4
MENU END
FOCUS
EXPOSURE
DATE TIME
TELE MACRO
TAPE LENGTH
M. W. B.
ZOOM SPEED
4
NEXT
T40
Tape length
indicator
MENU
AUTO
AUTO
DEC 25.98
OFF
T40
AUTO
FAST
MENU
AUTO
AUTO
DEC 25.98
OFF
T20
AUTO
FAST
GETTING STARTED

Recording Mode Setting

Set depending on your preference.
SET RECORDING MODE
1
First set the Power Switch to "CAMERA". Press SP/EP
Button for more than 1 second. "SP" (Standard Play)
provides higher picture and sound quality and is
better for dubbing, while "EP" (Extended Play) is
more economical, providing three times as the
recording time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.

Tape Length Setting

Set the tape length according to the length of the tape
used.
ACCESS MENU SCREEN
1
First set the Power Switch to "CAMERA". Turn the
Select Dial to any position except AUTO LOCK,
then press the MENU Jog Dial.
SELECT FUNCTION
2
Rotate the MENU Jog Dial to move the highlight bar
to "TAPE LENGTH", then press it. The TAPE
LENGTH Setting Menu appears.
SET TAPE LENGTH
3
Rotate the MENU Jog Dial to move the highlight bar
to the correct setting. T20=20 minutes of recording
time, T30=30 minutes, and T40=40 minutes (in SP).
•If you decide you want to return the tape length to
the previous setting, rotate the MENU Jog Dial to
move the highlight bar to "EXIT".
CLOSE MENU
4
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is on "MENU END".
Then press the MENU Jog Dial again to close the
Menu Screen.
NOTES:
The tape remaining time (
viewfinder is correct only if the correct tape length has
been selected.
Once you have set the tape length, it remains un-
changed even if the Select Dial is returned to AUTO
LOCK.
(cont.)
pg. 17) displayed in the