Husqvarna 540i XP Manual Del Usuario página 36

Technical data
Motor
Type
Features
Low energy mode
Lubrication system
Type of oil pump
Oil tank capacity, US Pint/litre
Weight
Chainsaw without battery, guide bar, saw chain and emp-
ty chain oil tank, lb/kg
Water protection level
IPX4
Saw chain/guide bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed / (savE), m/s
Radio frequency data for Bluetooth
Frequency band, GHz
Output power, max dBm 0
Recommended cutting equipment for
USA
Following is a list of recommended cutting equipment
for Husqvarna 540i XP and 540i XPG. This model
equipped with either of the listed guide bar and saw
chain combination(s), fulfills the requirements according
to UL 60745-1 and UL 60745-2-13.
Chainsaw models Husqvarna 540i XP and 540i XPG
met the kickback performance requirements of UL
60745-2-13 when tested with the combinations of bars
and saw chains listed below. The saw chain Husqvarna
36
Technical data
®
Accessories
540i XP
BLDC (brushless) 36V
savE
Adjustable
0.38/0.18
6.3/2.9
Yes
12-16/30-40
11-15/28-38
m0.325"/7 (SP21G)
24 (18)
2.4-2.4835
0
H38 is also classified as a low kickback saw chain
since is met the requirements for low kickback saw
chain outlined in UL 60745-2-13. We recommend to use
only the listed combinations of bars and saw chains for
chainsaw models Husqvarna 540i XP and 540i XPG.
Other chainsaw models may not meet the kickback
requirements when equipped with the listed bar and saw
chain combinations.
Guide bar and saw chain combinations
Following is a list of recommended cutting equipment
for Husqvarna 540i XP and 540i XPG. The listed
540i XPG
BLDC (brushless) 36V
savE
Adjustable
0.18/180
6.8/3.1
Yes
12-16/30-40
11-15/28-38
m0.325"/7 (SP21G)
24 (18)
2.4-2.4835
0
1065 - 009 - 07.09.2023