Husqvarna 540i XP Manual Del Usuario página 3

13. Transportation cover
14. Power trigger lockout
15. Power trigger
16. Drive sprocket cover
17. Chain tensioning screw
18. Chain catcher
19. Spiked bumper
20. Bar tip sprocket
21. Saw chain
22. Guide bar
23. Indicator for state of charge
24. Warning indicator
25. Power cord
26. Battery charger
27. Combination wrench
28. Warning indicator
29. Button, battery status
30. Battery status
31. Battery release button
32. Battery
33. Operator's manual
34. Oil pump adjustment screw
35. Product and serial number plate
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection and eye protection.
Use 2 hands when you operate the
product.
Do not operate the product with 1 hand
only.
Do not let the guide bar tip touch an
object.
1065 - 009 - 07.09.2023
Warning! Kickback can occur when the
guide bar tip touches an object. This
causes the guide bar to be thrown in the
direction of the operator. Risk of serious
injury or death.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Indication of chain direction.
Chain oil.
Rated voltage, V.
Direct current.
Protected against splashing water.
Recommended cutting equipment in this
Husqvarna HXX
example: Bar length XX in (XX mm),
max. nose radius X Teeth, chain type
XX mm/XX
Husqvarna HXX.
Measured maximum kickback value
XX
without triggering the brake, for the bar
and chain combination on the label.
If the product features
technology. The Bluetooth
be marked on the product name label.
Bluetooth
Refer to
on page 16 .
yyyywwxxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
®
Bluetooth
wireless
®
symbol will
®
wireless technology
The rating plate or the la-
ser printing shows the se-
rial number. yyyy is the
production year and ww is
the production week.
3