Husqvarna 540i XP Manual Del Usuario página 37

combination(s) of powerhead, guide bar and saw chain
meet all requirements outlined in Canadian Standards
Association Z62.1-11 (Chain saws) and Z62.3-11 (Chain
Saw Kickback).
Furthermore the saw chain Husqvarna H38 is evaluated
and listed as a Type C Low Kickback Saw chain
according to the provisions in Z62.3-11.
Kickback information
The guide bar nose radius is determined by either the
maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
Guide bar
Length, in Chain pitch, in
12 3/8 mini
14
16
12 0.325 mini
14
16
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
5/32 in / 4.0
SP21G
mm
3/16 in / 4.8
SP33G
mm
Approved batteries
Battery
Type
Battery capacity, Ah
1065 - 009 - 07.09.2023
Gauge, in Max. nose ra-
dius
0.050 9T
0.043 8T
60° 30°
80° 80°
BLi200X
Lithium-ion
5.2
As we are listing the maximum guide bar nose radius,
you may use a guide bar with smaller nose radius
than in our list. For guide bars of the same length, all
sprocket-nose guide bars of the same pitch and having
the same number of sprocket teeth may be considered
to have equivalent kickback energy.
The following cutting equipment is approved for the
models Husqvarna 540i XP
Saw chain
Type
Husqvarna
S93G
Husqvarna
SP21G
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
0.025 in/
0°
0.65 mm
0.025 in/
0°
0.65 mm
BLi300
Lithium-ion
9.4
® ®
, 540i XPG .
Length, drive Low kickback
links (no.)
45 Yes
52
56
51 Yes
59
64
5950046-02 5950047-02
5869334-03 5962857-01
37