cecotec MAMBO 11090 Manual De Instrucciones página 61

36. ScreenBlock function: If you want to lock the screen functions, press and hold the speed
button for 5 seconds. All the function buttons and the start/stop knob will be blocked. To
use them again, press and hold the speed button again for 5 seconds. This can be done
with the food processor at rest or in operation.
37. Timer function: if you want to finish cooking at a certain time, you can use this function to
ensure that your food is ready when the timer runs out.
5. OPERATION
Control panel. Fig. 13
1. Time indicator
2. Speed level indicator
3. Temperature indicator
4. Heat power indicator
5. Wi-Fi
6. Turbo
7. Scale
8. Timer
9. Speed
10. Temperature
11. Heat power
12. Start/pause/selector
Start/pause/selector
- Connect the plug to a power socket and operate the power switch to switch on the Mambo.
- Once connected and after entering the desired working parameters, press this button to
start your Mambo food processor.
- By pressing this button during the cooking process, the machine pauses and goes into
standby (you can open the lid, remove the jar, etc., but you must put it back in place before
you can start cooking again). If it is pressed again, it starts again.
- Your Mambo food processor will switch to standby mode after 10 minutes of non-operation
under the PAUSE status.
- It is also a selector to adjust the timer, stopwatch, speed, temperature, heat power. To do
so, you have to select the setting you want to change and turn the selector clockwise to
increase it and counterclockwise to decrease it.
- The preset functions are selected from the speed menu by turning the selector
counterclockwise.
- Stew function (A): In this mode the food processor will alternate between different speeds
to obtain the best results, you can set the temperature, heat power and time to your liking.
ESPAÑOL
MAMBO 11090 / 11090 HABANA
61