Publicidad
Idiomas disponibles
Idiomas disponibles
Control panel
The machine has the following controls and indicator lights:
20. Attach/release brush button (disk brushes only)
that enables the automatic brush attachment or
release.
21. Main
switch/Ignition
disconnects electrical power to and from all
functions of the machine.
22. Emergency stop button: acts as a safety device.
23. Speed potentiometer: regulates the maximum
speed of the machine forward and in reverse.
24. Direction selector switch, determines movement
of the machine forward or in reverse.
25. Buttons "+" and "-", pressing these buttons
26. Display, showing: Battery voltage (Volt), Alarm
codes and Hour counter.
27. Horn button.
28. Vacuum button: enables/disables the vacuum
motor.
29. Brush button: enables/disables operation of the
brush head.
30. Detergent tank level indicator: the LED comes
detergent tank.
31. Dirty water tank level indicator: when the dirty
water tank is full, the LED comes on.
32. Work program buttons (AUTOMATIC MACHINE
OPERATION): buttons used to set the machine's
work program:
-
1, light intensity cleaning program for smooth
-
2, medium intensity cleaning program for
-
3, high intensity cleaning program for rough
33. Drive wheel LED status indicator.
34. Programming button: press this button to scroll
the parameters that can be set in the machine's
software.
27
22
switch:
connects
and
32
20
34
26
33
21
EN
Accessories
See list of recommended spare parts
-
and polishing.
-
washing.
-
Tynex brushes/rollers: for removing accumulated
-
cleaning pad.
-
WET and GEL batteries.
-
Battery charger.
30
31
25
24
23
28
29
12
Publicidad
