Tennant T1581 Manual De Instrucciones página 19

- Press the brush coupling/release button, the
which immediately enables the coupling operation;
now the machine is ready for the coupling step,
which can be accomplished by pressing the brush
coupling and release button a second time.
Installation of brushes (Cylindrical Brush
Model).
! ATTENTION: before carrying out the operations
apply the parking brake.
! DANGER: during installation, the operator
must wear personal protective equipment
(gloves, eyewear, overalls, etc.) needed to limit
the risk of accidents.
Assembly:
-
knob.
- Remove the cover from the brush compartment
by unscrewing the knob.
- Position the roller brushes in the two compartments,
making certain that the guide pin on the opposite
side is correctly located.
EN 19