Tennant T1581 Manual De Instrucciones página 27

Removing the the brush/pad drivers
! ATTENTION: before carrying out the operations
apply the parking brake.
- Turn the ignition key to switch the machine on.
- Press the brush attach/release button; the
machine will respond by operating the release
mechanism.
-
remove the brushes from under the head.
Moving the machine when not in operation
To move the machine, proceed as follows:
- Turn the ignition key to switch the machine on.
- Press the accelerator pedal.
- The top speed of the machine is adjusted by turn-
ing the potentiometer.
- To stop the machine, release the accelerator ped-
al and depress the brake pedal; refer to the sec-
Service brake and parking brake ".
-
-
brake and parking brake ".
EN
Service
27