Publicidad
Idiomas disponibles
Idiomas disponibles
-
Disassembly:
-
Repeat the steps described above in reverse
order.
Installation of side brushes (Cylindrical
Brush Model).
! ATTENTION: before carrying out the operations
apply the parking brake.
! DANGER: during installation, the operator
must wear personal protective equipment
(gloves, eyewear, overalls, etc.) needed to limit
the risk of accidents.
Assembly:
-
Undo the screw on the motor shaft.
-
Check that the drive key is located in the keyway
of the motor shaft.
-
motor shaft.
-
Retighten the clamp screw.
Disassembly:
-
Repeat the steps described above in reverse
order.
Filling the detergent tank
! ATTENTION: before carrying out the operations
apply the parking brake.
!
liquids into the tank.
temperature of between +4 °C / 39.2 °F and 55 °C /
131 °F.
! ATTENTION: the machine has been designed for
use with detergents supplied or recommended by
the Manufacturer. The use of other detergents or
! ATTENTION: the selected detergent should be
utilized rationally, in accordance with the directions
given on the packaging of the product.
! ATTENTION: select a detergent from the range of
recommended products that is most suitable for the
washing operation in hand, and dilute with water
following the instructions on the pack or in the
catalogue.
Fill the tank through the opening provided.
EN
20
Publicidad
