The angle of the blades can be adjusted by turning the
knob positioned above the squeegee.
Similarly, the height of the squeegee can be adjusted by
raising or lowering the two wheels positioned in front of /
behind the squeegee, turning the relative knobs.
Installation of Brush / Drive disc
! ATTENTION: before carrying out the operations
apply the parking brake.
! DANGER: during installation, the operator
must wear personal protective equipment
(gloves, eyewear, overalls, etc.) needed to limit
the risk of accidents.
! ATTENZIONE: before installing the Drive disc on the
machine, make certain that the Pad is attached to the
disc.
Installation of Brush (or Drive disc)
-
the brushes underneath the housing, making
certain that they rest against the locating stops to
align them with the coupling assembly.
-
Turn the ignition key to switch the machine on.
EN
18