Tennant T1581 Manual De Instrucciones página 16

- Unlock the dirty water tank from the solution tank
by pulling the knob as illustrated.
- Rotate the stop, and release the knob so that it
locates in the retaining hole.
- Return the operator seat to the working position.
- Tilt the dirty water tank backwards.
! DANGER: after tilting the dirty water tank, the
safety bracket must be inserted into one of the
two available slots to prevent the tank from
accidentally closing.
! NOTICE
When servicing machine, if extra tank clearance is
needed, carefully push the tilted tank further back
until the safety bracket engages second slot.
- Place the batteries in the battery compartment as
indicated on the label under the seat frame.
- Connect the wiring terminals to the battery poles,
tighten and smear with Vaseline.
- Reinstate the dirty water tank in the working
position, locking it to the solution tank by means
of the stop.
- When using the machine, follow the instructions
below.
EN 16