ERROR CODE
BRUSH TEMPERATURE
BATTERY RESERVE
BATTERY LOW
BATTERY FLAT
PARKING BRAKE
DIRTY WATER LEVEL
WATER RESERVE
NO WATER
ALARMS/WARNINGS DISPLAYED
CAUSE
Machine being overworked.
The work program selected is too
heavy for the type of surface.
Electronics damaged
Low battery voltage.
Low battery voltage.
Low battery voltage.
Parking brake engaged.
Brake pedal microswitch not
mounted correctly.
Brake pedal microswitch not
functioning correctly.
Water level sensor tripped.
Level sensor stuck.
Water level sensor tripped.
Level sensor stuck.
Water level sensor tripped.
Level sensor stuck.
SOLUTION
Wait 30 minutes for the temperature
to come down.
Drop from 3 to 2 or 1.
Replace the power pcb.
Charge the battery.
Charge the battery.
Check the battery acid level and top
up if necessary.
Release the parking brake.
Adjust the position of the
microswitch.
Replace the microswitch.
Empty the dirty water tank.
Check the sensor.
Prepare to empty the dirty water
tank.
Check the sensor.
Fill the solution tank.
Check the sensor.
EN
37