EN
60
DISASSEMBLY
Note: Installation/assembly and disassembly of the unit must only be carried
out by qualified personnel.
Before dismantling, any gas in the unit must be vented. Proceed as follows:
•
Close all supply valves, but do not disconnect the gas cooker from the line yet.
•
Now light all the burners. The remaining gas contained in the appliance burns
off in a short time.
•
After that, the appliance's pipes are free of gas and the gas cooker can be
disconnected from the connections.
Important notes on dismantling the unit
•
The disassembly is the same as the installation / assembly in the reverse order
of the steps.
•
Have a second person help you during disassembly to avoid injury.
•
Ensure sufficient ventilation of the working area during disassembly.
•
There are no motors or accumulators in this gas hob. Observe the section
"Disposal Considerations".