Publicidad
Instrucciones de control remoto
Instrucciones IEEE 488.2: Descripción
Description
Syntax
Response(s)
Description
Syntax
Parameter(s)
74
The intent of the *IDN? query is for the unique
identification of devices over the system
interface.
*IDN?
"EXFO E.-O. Engineering,FLS-5834A,xxxxxxxxxx,
2.0r0", where
– xxxxxxxx is the serial number
– 2.0r0 is the Firmware level.
This command is used to set the Remote
Lockout programming state.
*LOK<wsp><LockoutState>
LockoutState:
The program data syntax for <LockoutState> is
defined as a <Boolean Program Data> element.
The <LockoutState>special forms ON and OFF
are accepted on input for increased readibility.
ON corresponds to 1 and OFF to 0.
The <LockoutState> parameter is the new
lockout state of the Fuente de analizador de
CD/PMD:
"0"- Removing the Lockout state of the source.
"1"- Enabling the Lockout state of the source.
*IDN?
*LOK
FLS-5834A
Publicidad
