Publicidad
Description
Syntax
Parameter(s)
Example(s)
Notes
Fuente de analizador de CD/PMD
Instrucciones de control remoto
Instrucciones IEEE 488.2: Descripción
This command is used to set the Remote
programming state that determines if the source
will be controlled locally or remotely.
*REM<wsp><RemoteState>
RemoteState:
The program syntax data for <RemoteState> is
defined as a <Boolean Program Data> element.
The <RemoteState> special forms ON and OFF
are accepted on input for increased readibility.
ON corresponds to 1 and OFF to 0.
The <RemoteState> parameter is the new
remote state of the Fuente de analizador de
CD/PMD:
"0"- to set Local state.
"1"- to set Remote state.
*REM 1
This command can only be used with RS-232
communication.
*REM
79
Publicidad
