Oase Filtral UVC Serie Instrucciones De Uso página 27

Idiomas disponibles

Installation

Set up the device horizontally

Observe the following conditions:

• Ensure that the connection to the power supply is at least 2 m from the edge of the pond.

• Place the device so that the filter housing is always below the water level.

• Position the device so that the nozzle insert is above the water level.

• Place the unit in the pond on horizontal, firm and sludge-free ground.

Hang up the device

Observe the following conditions:

• Ensure that the connection to the power supply is at least 2 m from the edge of the pond.

• Place the device so that the filter housing is always below the water level.

• Only operate the device without water feature.

• Screw the two screws into the filter base and hang the device on the two screws with a cord.

Fasten the cord on the side of the pond.