Oase Filtral UVC Serie Instrucciones De Uso página 28

Idiomas disponibles

Set-up fountain/feature

In order to adapt the water feature, the length and the vertical position of the nozzle pipe need

to be altered. The water flow rate can be regulated using the two flow-rate regulators on the

branch valve.

How to proceed:

1. Set the nozzle pipe to the length required.

2. Loosen the union nut, align the nozzle pipe vertically and hand-tighten the union nut once

Commissioning/start-up

The unit will be destroyed if it is operated with a dimmer. It contains sensitive electrical compo-

Do not connect the unit to a dimmable power supply.

Switching on: Connect the unit to the mains. The unit switches on immediately.

Switching off: Disconnect the unit from the mains.

The viewing window shows that the UVC lamp in the device is working.