Publicidad
Idiomas disponibles
Idiomas disponibles
en
Technical data
Mirka® PS 1519
Power
Mains voltage
Speed
Size of backing pad
Weight
Degree of protection
Noise and vibration information
Measured values are determined according to EN 60745
Mirka® PS 1519
Sound pressure level (L
Sound power level (L
Sound measurement uncertainty K
Vibration emission value a
Vibration emission uncertainty K *
Specifications subject to change without prior notice Model range may vary between markets
* The values stated in the table are derived from laboratory testing in conformity with stated codes and standards and
are not sufficient for risk evaluation Values measured in a particular work place may be higher than the declared
values The actual exposure values and amount of risk or harm experienced by an individual are unique to each
situation and depend upon the surrounding environment, the way in which the individual works, the particular
material being worked, work station design and the user's exposure time and physical condition Mirka Ltd accepts
no responsibility for the consequences of using declared values instead of actual exposure values for any individual
risk assessment
Initial operation
Before use, check that the rated mains voltage and mains frequency as stated on the type plate match your
power supply
Always install an RCD with a maximum trip current of 30 mA upstream
Always guide the power tool with both hands on the handles provided
Attach handle
Always work with the handle (6) attached! Attach the handle on the left or right of the machine and secure
Installing the tools
Press in the spindle lock button (1) only when the spindle is stationary!
Locking the spindle
Press in the spindle lock button (1) and turn the spindle by hand until the spindle locking button engages
50
Mirka® Polisher PS 1519 • 230 V
)
pA
)
WA
*
h
1500 W
220–240 VAC
300–1900 rpm
Ø 180 mm (7")
2 4 kg (5 3 lbs)
II
79 dB(A)
91 dB(A)
3 dB
1 6 m/s
2
1 5 m/s
2
Publicidad
