Anexo B
B.1. Installation in the USA and Canada
To maintain the cURus approval, the additional information in this section must be followed.
Environmental enclosure ratings
The MGE, MLE Model K enclosure is approved for NEMA type 2 and 12 and are suitable for indoor use only.
For more information about ambient temperature during operation, see the sections on operating conditions and
ambient temperature.
EMC statements for USA
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
MLE motors of the C2 emission category fulfill the limits of Class A.
MLE motors of the C3 emission category can only be used in industrial plants and public utilities in
accordance with FCC § 15.103(b) and ICES 003 § 1.5.1(c). In other locations, MLE motors of the C1
or C2 emission category must be used.
Canadian Interference-Causing Equipment Standard
MLE Model K complies with the Canadian ICES-003 Class A specifications. This Class A device meets all the
requirements of the Canadian interference-causing equipment regulations.
L'appareil MLE Model K, est conforme à la norme NMB-003 du Canada pour le matériel de classe A. Cet
appareil de classe A respecte toutes les exigences du règlement canadien s'appliquant au matériel brouilleur.
Hot surface
The product might reach a surface temperature of 149 °F (65 °C), therefore pay attention when operating the
product.
The following marking is found on the product:
21