Vaisala PR53AC Guia De Instalacion página 16

Follow these instructions to install the refractometer with a flow cell. Notice that the images in
this instruction may differ from the flow cell you have for your process.
1. Make sure the process line is depressurized.
2. Weld ferrules into the process pipeline according to material and system requirements.
Table 5 Flow cell installation dimension
Flow cells
A (mm [in]) 52.5 [2.0] 72.2 [2.8]
3. Install gasket into the ferrule.
16
A
1" 1 ½"
a2
2" 2 ½"
91.0 [3.5] 110.2 [4.3]
/
3" 4"
128.3 [5.0] 169.6 [6.6]
M212866EN-B