Vaisala PR53AC Guia De Instalacion página 22

5. Install the cable with the cable gland or conduit hub.
a. Feed the cable through the cable gland. Ground the cable gland by removing the
15‑mm sleeve from the cable, brushing the metal braid upwards and folding it over.
Make sure the wires reach the terminal. Tighten the cable gland to 5 Nm using a
22‑mm wrench. Make sure the wires are not twisting.
b. Feed the cable through the conduit. Make sure the wires reach the terminal. Tighten
the conduit hub to 5 Nm using a 24‑mm wrench. Make sure the cables are not
twisting.
22 M212866EN-B