Publicidad
Idiomas disponibles
Idiomas disponibles
All installation stages must be considered right from
production of the general layout. Before starting
these stages, as well as deciding the place of instal-
lation, if necessary, the person authorised to carry
out these operations must organise a "safety plan"
to protect the people directly involved, and he must
also ensure strict compliance with all legal require-
ments, especially those relating to mobile work-
sites. The place of installation must have all the
connections needed to supply the appliance and
dispose of the production residues, must be suita-
bly lit and must meet all legal health and hygiene re-
quirements to prevent the contamination of the
foods. If necessary, fix the exact position of each in-
dividual appliance or subassembly by mark coordi-
nates to locate them correctly.
Appliances must be at some distance from the wall at
least (200 mm) if the wall is not designed to be
resistant to a temperature of at least (150 °C).
Important
The room where the appliance is installed
must have air inlets to ensure that the appli-
ance can operate correctly and provide the
IT
necessary air exchange in the room itself.
GB
Important
The air inlets must be of appropriate size
DE
and must be protected by gratings and
placed so that they cannot be obstructed.
FR
ES
Screw the feet (A) onto the structure in the connec-
tion points.
English
INSTALLATION OF THE APPLIANCE
ROOM VENTILATION
INSTALLING ACCESSORIES
Install in accordance with the relevant legislation, reg-
ulations and specifications in the country of use.
A
- 12 -
IDM-39610800700.tif
IDM-39610800900_08WFA4V.tif
IDM-39610802700.tif
Publicidad
