Angelo Po 04WFAAV Manual De Uso E Instalación página 40

Before carrying out any replacement procedure, ac-
tivate all the safety devices provided and decide
whether staff at work and those in the vicinity
should be informed. In particular, turn off the gas
supply tap and prevent access to all devices which
might cause unexpected health and safety hazards
if turned on. If work parts have to be replaced, use
original spare parts only. The manufacturer de-
clines all responsibly for injury or damage to com-
To carry out this operation,
proceed as follows.
1 - Turn off the gas
supply tap.
2 - Remove the grid
(A).
3 - Extract the burner (B).
4 - Unscrew the nozzle (C)
and replace it with the
one suitable for the type
of gas in use (see table
at back of manual).
IT
5 - Replace the burner and
the grid.
GB
DE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
FR
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
ES
panels (B).
4 - Unscrew the nozzle (D) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the control panels (B) and the knobs
(A) on completion of the operation.
English
REPLACING PARTS
INSTRUCTIONS AND WARNINGS FOR REPLACING PARTS
REPLACING THE TOP BURNER NOZZLE (Ø110 - 7 KW)
REPLACING THE TOP BURNER NOZZLE (Ø130 - 10 KW)
ponents due to the use of non original parts, or
extraordinary work on the appliance which may
modify the safety requirements without the manu-
facturer's authorisation. When ordering compo-
nents, follow the instructions provided in the parts
catalogue.
B
A
C
A C B
- 18 -
9
8
C
IDM-39610802200.tif
D
8
IDM-39610802300.tif