Angelo Po 08WFA2PG Manual De Uso página 47

USE AND OPERATION
SWITCHING THE COOKING PLATE BURNER ON AND OFF
Lighting
IMPORTANT: The fi rst time the
griddle is switched on, wash the plate to
remove the protective grease and any dirt,
then switch on the appliance and preheat it
for about 1 hour at the minimum power set-
ting.
Turn on the gas supply tap.
1)
Press the knob (D) and turn it anti-clockwise
2)
(pos. 1), while keeping button (E) pressed, to
light the pilot light.
Keep the knob pressed for about 15 sec. to
3)
prime the thermocouple.
Turn the knob anti-clockwise (pos. 2) to light
4)
the burner.
Turn the knob gradually anti-clockwise to
5)
adjust the power of the fl ame down to the
minimum setting.
Turning off
Turn the knob clockwise (pos. 3) to turn the
1)
burner off . The pilot light will remain on to
allow the burner to be re-lit.
Lighting
Open the gas supply tap.
1)
Press the knob (C) and turn it anti-clockwise
2)
(pos. 1), while keeping button (A) pressed, to
light the pilot light.
Keep the knob pressed for about 15 sec. to
3)
prime the thermocouple.
Turn the knob anti-clockwise (pos. 2) to light
4)
the burner.
Turn the knob gradually anti-clockwise to
5)
adjust the power of the fl ame down to the
minimum setting.
3329590_ut_GB_rev.2
SWITCHING THE TOP BURNERS ON AND OFF
Turn the knob clockwise (pos. 4) to turn off
2)
the pilot light.
Turn off the knob to ensure safety
3)
ENGLISH
19