Publicidad
Idiomas disponibles
Idiomas disponibles
Manual de Instalación y Operación
Illustrative picture
TN: Carga = Charge
4.9. CONNECTION WITH 2 CURRENT ELEMENTS
This kind of connection is utilized in panels with measurement systems
utilizing only 2 current elements to make a measurement in the CT 's it is necessary
to have the CT adapter, which must be connected to the system CT 's you want to
measure. The PowerNET P-600 allows that this kind of connection be done also with
current sensors, this way program at the elements CONFIGURATION: 2 CT 's. connect
the current sensors set to the electrical network according with the following drawing
PowerNET P-600
111
Publicidad
