Publicidad
Idiomas disponibles
Idiomas disponibles
TN
Ender. Rede = Addr. Network
Vel. Serial = Speed. Serial
Avanca em F2>> = Go forward in F2>>
Addr. Network: (Network address)
v Utilize the increase or decrease keys to define the variable value.
v To confirm and go to the next parameter press F2.
v To leave press F6.
This parameter is used when the equipment is inserted in a communication
network. It is not necessary to change this address.
Obs.: the value configured for this parameter must be the same in the
Analizer software, otherwise the equipment will not communicate.
Speed Serial: (Communication rate)
v Utilize the increase or decrease keys to define the variable value.
v To confirm and go to the next parameter press F2.
v To leave press F6.
Allowed values for a serial communication speed: 9600bps, 19200 bps or
34800 bps.
Obs.: the value configured for this parameter must be the same in the Analyzer
software, otherwise the equipment will not communicate.
Display rate: (Display variables actualization rate)
TN
Taxa Display = Display rate
Idioma = Language
Avancar em = Go forward in
v Utilize the increase or decrease keys to define the variable value.
v To confirm and go to the next parameter press F2.
v To leave press F6.
This value is defined in milliseconds and represents the display actualization
time For instance, if was configured 1008ms, the variables will be actualized in the
display each 1 second approximately.
Language
v Utilize the increase or decrease keys to define the language for the equipment.
Portuguese or Spanish.
v To confirm and go to the next parameter press F2.
v To leave press F6.
PowerNET P-600
Installing and Operating Manual
118
Publicidad
